ZEBRA Elastomeric Connectors
ZEBRA Features
-
High Density, increased number of I/O's
-
Low resistance, high current capacity
-
Low insertion force, low compression force
-
Redundant contact engagement
-
High electrical and mechanical reliability
-
Chemical stability, degradation resistance
-
Cost effectiveness, ease of assembly
ZEBRA CARBON/ SILVER CONNECTOR SERIES
ZEBRA elastomeric connectors are constructed of alternating parallel layers of electrically conductive and non-conductive silicone elastomer. ZEBRA provides a redundant connection with a minimum of two conductive layers recommended per PC contact pad. The connector is available with insulating barrier or silicone supports.
-1) Plain Type(Figure-1)
-2) Solid Self-Support Type(Figure-2)
-3) Insulation Barrier Type(Figure-3)
-4) Sponge Self-Support Type(Figure-4)
RESISTANCE - To calculate the resistance of ZEBRA connectors, choose one of the following formulas:
ZEBRA Features
ZEBRA Series 8000 elastomeric connector elements are D-shaped, low durometer silicone elastomers cores around which flat metallic gold-plated conductors are vulcanized in a row parallel to each other. The tips of the metallic conductors are turned upward so that point contact can be affected; in addition, contact is made to the flat area when the connector element is positioned between two printed circuit boards. The point contact will penetrate surface oxides or contaminants which might be present on the surface of the contact pads.
Product Line | Product Type | Series | Construction Options | Conductive Layers |
|---|---|---|---|---|
Zebra Elastomeric Connector | Carbon - CA-1002
| 1002 Series (0.1mm Pitch) | Solid Self Support (both sides) |
Solid Self Support (one side only) |
Insulation Barrier (0.5mmT) both sides |
Insulation Barrier (0.5mmT) one side only |
Plain Type (no self support or insulation barriers) | | 240 |
Zebra Elastomeric Connector | Carbon CA-2004 | 2004 Series (0.18mm Pitch) | Solid Self Support (both sides) |
Solid Self Support (one side only) |
Insulation Barrier (0.5mmT) both sides |
Insulation Barrier (0.5mmT) one side only |
Plain Type (no self support or insulation barriers) | | 140 |
Zebra Elastomeric Connector | Carbon CA-2005 | 2005 Series (0.05mm Pitch) | Solid Self Support (both sides) |
Solid Self Support (one side only) |
Insulation Barrier (0.5mmT) both sides |
Insulation Barrier (0.5mmT) one side only |
Plain Type (no self support or insulation barriers) | | 500 |
Zebra Elastomeric Connector | Gold Au | 8000A Series (0.25mm Pitch) | Wire Spacing Au-A (.010") |
Wire Spacing Au-B (.0075")|
Wire Spacing Au-C (.006")| | |
Zebra Elastomeric Connector | Gold Au | 8000B Series (0.19mm Pitch) | Wire Spacing Au-A (.010") |
Wire Spacing Au-B (.0075")|
Wire Spacing Au-C (.006")| | |
Zebra Elastomeric Connector | Gold Au | 8000C Series (0.15mm Pitch) | Wire Spacing Au-A (.010") |
Wire Spacing Au-B (.0075")|
Wire Spacing Au-C (.006")| | |
Zebra Elastomeric Connector | ZEBRA Silver AG
| Ag-5002 | Solid Self Support (both sides) |
Solid Self Support (one side only) |
Insulation Barrier (0.5mmT) both sides |
Insulation Barrier (0.5mmT) one side only |
Plain Type (no self support or insulation barriers) | | 240 |
Zebra Elastomeric Connector | ZEBRA Extruded Dummy Connector | DC-EXT |