SARCON® Thermal Management Components

More power and light weight. In the past, these two characteristics in electronics were mutually exclusive. Now, micro-electronics are just that, and in addition, need thermal management components to further complement these objectives.

SARCON® is an advanced silicone rubber with high thermal conductivity and superior flame-retardancy. By combining the inherent silicone rubber properties of heat resistance, electrical insulation and long-term aging into one compound, this universally applicable material can be made in an unlimited number of thermal management configurations.

UL File Number: E58126

Applications:

  • Thermal conductive insulators for semiconductors
  • Compression jointing materials for thermistors and temperature sensors
  • Thermal conductive material for all types of heaters

Thermal Conductivity Conversion Table

Thermal Conductivity BTU-in/hrft2F Cal/cm - sec - °C Watt/m-K
BTU-in / hrft2F 1 3.4x10-4 0.14
Cal / cm - sec - °C 2.9x103 1 4.2x102
Watt / m-K 6.9 2.4x10-3 1

Formula/Configurations:

A variety of specific compounds are available for a wide range of performance requirements in Sheets, Rolls, Die-cuts, Sleeves, Gel, Extrusions, Moldings

SARCON® Type Application Guidelines Typical Thermal Conductivity
Cal/cm - sec - °C Watt/m•K
SARCON® GTR Thin Film(Fiberglass Reinforced) General purpose with 0.05 mm glass cloth reinforcement 2.2 x 10-3 0.90
SARCON® GHR Good thermal conductivity with 0.05mm glass cloth reinforcement 3.4 x 10-3 1.40
SARCON® GSR High thermal conductivity with 0.05mm glass cloth reinforcement 7.0 x 10-3 2.90
SARCON® GAR Highest thermal conductivity with 0.05mm glass cloth reinforcement 7.2 x 10-3 3.00
SARCON® QR Thin Film (Non-Reinforced) Low hardness 2.6 x 10-3 1.10
SARCON® TR General purpose 2.9 x 10-3 1.20
SARCON® HR High thermal conductivity 4.1 x 10-3 1.70
SARCON® YR-a Very high thermal conductivity 5.3 x 10-3 2.20
SARCON® YR-c Very high thermal conductivity 9.6 x 10-3 4.00
SARCON® GR-T2d Thin Film Gap Filler(Nylon Reinforced) Nylon mesh reinforced gap filler pad, 0.25mm thickness 3.6 x 10-3 1.50
SARCON® GR-ae Standard Gap Filler General purpose gap filler pad, UL94 V-0/V-1 class 3.1 x 10-3 1.30
SARCON® GR14A General purpose gap filler pad, UL94 V-0/V-1 class 3.6 x 10-3 1.40
SARCON® GR25A General purpose gap filler pad, UL94 V-0 class 6.0 x 10-3 2.80
SARCON® GR-Sd Low Compression Force Gap Filler Low modulus gap filler material 3.4 x 10-3 1.50
SARCON® PG25A Silicone compound with double sticky
surfaces
6.0 x 10-3 2.5
SARCON® GR45A High Performance Gap Filler High thermal conductivity gap filler pad 14.4 x 10-3 6.00
SARCON® GR80A Very high thermal conductivity gap filler pad 26.3 x 10-3 13.00
SARCON® XR-m Highest thermal conductivity gap filler pad 40.8 x 10-3 17.00
SARCON ® SPG-20B   Low viscosity type silicone compound gap filler(thick gaps) 3.6 x 10-3 2.1
SARCON® SPG-30B High viscosity type silicone compound gap filler 7.7 x 10-3 3.10
SARCON® SPG-50A Low viscosity type silicone compound gap filler 12 x 10-3 5.0
SARCON® GR-Pm Putty  Medium thermal conductivity putty 14.4 x 10-3 6.00
SARCON® PG80A High performance thermal conductivity putty 26.3 x 10-3 13.00
SARCON® XR-Um Highest thermal conductive thin-film putty 40.8 x 10-3 17.00
SARCON® XR-Um-AL Highest thermal conductive putty with Aluminum film 40.8 x 10-3 17.00
SARCON® NR-c Non-Silicone Highly conformable non-flammable non-silicone gap filler 3.6 x 10-3 1.50
SARCON® SG07SL Thermally Conductive Grease Highly thermally conductive, non-reactive silicone-based grease 2.1 x 1014 0.75
SARCON® SG26SL Highly thermally conductive, non-reactive silicone-based grease 2.8 x 1014 2.6
Mica   Shown for comparison purposes only 1.4 x 10-3 0.59
Polyester Shown for comparison purposes only 0.34 x 10-3 0.14

How can We Help You?