Navigate
Product Lines
- ZEBRA® Elastomeric Connectors
- SARCON® Thermal Management Components
- Fusible Tapes
- Custom Silicone Rubber Extrusions
Solid Self Supported Connectors
To view this information in our catalog click here
The Solid Self-Supporting ZEBRA® connector utilizes a standard ZEBRA® connector element supported by a soft, non-conductive silicone rubber on one or two sides. The silicone rubber creates a larger width that eliminates the need for a holder, and yet the force required for deflection is very low. The standard Solid Self-Supporting ZEBRA® connector has a 0.020”/0.50mm wide ZEBRA® connector element and is available in 8 different widths to accommodate LCD’s with a glass lip overhang of 0.050”/1.27 mm minimum.
Sponge Self Supported Connectors
The Self Supporting Sponge ZEBRA® connector utilizes standard ZEBRA® connector elements supported by a silicone sponge rubber on one or two sides. The silicone sponge creates a larger width that can eliminate the need for a holder, and yet the force required for deflection is very low. The standard Self Supporting Sponge ZEBRA® connector is available in a host of widths to accommodate LCD’s with a glass lip overhang of 0.060”/1.5 mm minimum. The Self Supporting Sponge ZEBRA® connector is used to connect LCD’s to printed circuit boards and eliminates bowing of the printed circuit board due to the low force required to make contact.
ZEBRA® CONNECTOR INSULATING BARRIER
| Description | Insulating Barrier |
|---|---|
| Color (one only) | White |
| Hardness, Durometer A | 30 |
| Dielectric Strength volts/mil. | 500 |
| Resistance, ohms | 1012 |
| Insulating Barrier Width (B) in.* (B) mm |
0.002 ± 0.001 0.050 ± 0.025 |
TABLE D *The tolerance of W1 is equal to the sum of the tolerances of W.
