Technical Data Ask an Engineer Request a Sample Request a Quote Request a Catalog

SARCON® GR-T2D / GR-Tac

To view this information in our catalog click here

Technical Documents Available for G-Tac!

Technical Documents Available for GR-T2d!

 

SARCON® GR-T2d and GR-Tac are a very soft, highly conformable, thermal interface medium. The compositecon struction offers the combined benefits of both a soft Gap Filler Pad and a thin polyester reinforced thermal conductor.

This unique blend of technologies provides the following advantages:

  • Soft, low stress on component
  • Naturally tacky, ease of assembly, adhesive not required
  • Thin, low thermal resistance
  • Polyester reinforced. Tight tolerances more easily maintained.
  • Available in rolls or sheets, suitable for high or low volume applications

UL File Number: E58126

Applications:

  • Semiconductors to heat sink
  • Chassis walls to other surfaces
  • Component to heat spreader
  • CD-Rom, DVD-Rom cooling

Features:

  • Highly conformable
  • Excellent between surfaces where space and surface textures vary

Construction:


Typical Properties SARCON® 25GR-T2d, 25 GR-Tac

Test PropertiesTest MethodUnitMeasure
Sarcon 25GR-T2d
Moderate Tack
Thermal
properties		 Thermal conductivity FTM P-1612 W/m・K 1.5 (ASTM-D2326 equivalent)
Thermal resistance FTM P-3050 psi 14.5 psi 43.5 psi 72.5 psi
˚C•in2/W 0.480 0.40 0.33
(˚C•cm2/W) (3.10) (2.56) ( 2.10)
Electrical
properties		 Operating temperature Fujipoly ˚C -40˚C to +150˚C
Volume resistivity ASTM D257 MΩ-m 3 x 105
Breakdown voltage ASTM D149 kV 5
Withstand voltage ASTM D149 kV/min 3
Color Fujipoly Visual Gray
Thickness Fujipoly mm 0.25
Sheet sizes Fujipoly mm 200mm wide x 300mm length
Roll sizes Fujipoly mm 100mm, 200mm, 400mm wide x 10m length 
Physical
properties		 Hardness ASTM D2240 Asker - C
Shore 00		 -
Tensile strength ASTM D412 MPa 11
Elongation ASTM D412 % 15
Tear strength ASTM D624 kN/m 21
Specific gravity ASTM D792 - 2.5
Extractable volatiles Fujipoly wt %  
Flammability UL94 - VTM-O equivalent
Compression Fujipoly N
(area=25x25mm)		 54 @ 10%, 171@ 20%,
329 @ 30%, 500 @ 40%, 681 @ 50%
Heat aging
+70˚C		       Initial 100hrs 500hrs 1000hrs
Specific gravity ASTM D792 - 2.5 2.5 2.5 2.5
Tensile strength ASTM D412 MPa 11 7 7 6
Elongation ASTM D412 % 15 15 15 15
Tear strength ASTM D624 kN/m 20 14 11 11
Volume resistivity ASTM D257 MΩ-m 3 x105 8 x 105 2 x 106 8 x 105
Thermal conductivity FTM P-1620 Watt/m•K 1.5 1.5 1.5 1.5
+150˚C Specific gravity ASTM D792 - 2.5 2.5 2.5 2.6
Tensile strength ASTM D412 MPa 11 6 5 5
Elongation ASTM D412 % 15 15 15 15
Tear strength ASTM D624 kN/m 20 14 11 11
Volume resistivity ASTM D257 MΩ-m 3x 105 8 x 105 8 x 105 2 x 106
Thermal conductivity FTM P-1612 Watt/m•K 1.5 1.5 1.5 1.5
+150˚C Specific gravity ASTM D792 - 2.5 2.5 2.5 2.5
Tensile strength ASTM D412 MPa 11 7 7 7
Elongation ASTM D412 % 15 15 15 15
Tear strength ASTM D624 kN/m 20 14 14 14
Volume resistivity ASTM D257 MΩ-m 3 x 105 2 x 105 4 x 105 2 x 106
Thermal conductivity FTM P-1620 Watt/m•K 1.5 1.5 1.5 1.5
Test PropertiesTest MethodUnitMeasure
Sarcon 25GR-Tac High Tack
Thermal
properties		 Thermal conductivity FTM P-1612 W/m・K 1.5(ASTM-D2326 equivalent)
Thermal resistance FTM P-3050 psi 14.5 psi 43.5 psi 72.5 psi
˚C•in2/W 0.35 0.33 0.32
(˚C•cm2/W) (2.25) (2.12) (2.06)
Electrical
properties		 Operating temperature Fujipoly ˚C -40˚C to +150˚C
Volume resistivity ASTM D257 MΩ-m 2 x 105
Breakdown voltage ASTM D149 kV 4
Withstand voltage ASTM D149 kV/min 3.5
Color Fujipoly Visual Dark Reddish Gray
Thickness Fujipoly mm 0.25
Sheet sizes Fujipoly mm 200mm wide x 300mm length
Roll sizes Fujipoly mm  
Physical
properties		 Hardness ASTM D2240 Asker - C
Shore 00		 35
Tensile strength ASTM D412 MPa 9
Elongation ASTM D412 % 25
Tear strength ASTM D624 kN/m 14
Specific gravity ASTM D792 - 2.6
Extractable volatiles Fujipoly wt % 0.0029 (D4 ～ D20) Siloxane
Flammability UL94 - VTM-O equivalent
Compression Fujipoly N
(area=25x25mm)		 41@10%, 123@20, 247@30%,
379@40%, 548@50%
Heat aging
+70˚C		       Initial 100hrs 500hrs 1000hrs
Specific gravity ASTM D792 - 2.6 2.6 2.7 2.7
Tensile strength ASTM D412 MPa 9 9 9 9
Elongation ASTM D412 % 25 25 20 15
Tear strength ASTM D624 kN/m 14 15 15 14
Volume resistivity ASTM D257 MΩ-m 2 x 105 1 x 105 9 x 104 9 x 104
Thermal conductivity FTM P-1620 Watt/m•K 1.6 1.6 1.6 1.6
+150˚C Specific gravity ASTM D792 - 2.6 2.7 2.7 2.7
Tensile strength ASTM D412 MPa 9 9 9 9
Elongation ASTM D412 % 25 20 20 15
Tear strength ASTM D624 kN/m 14 15 18 19
Volume resistivity ASTM D257 MΩ-m 2 x 105 8 x 104 2 x 104 3 x 105
Thermal conductivity FTM P-1612 Watt/m•K 1.6 1.6 1.6 1.6
+150˚C Specific gravity ASTM D792 - 2.6 2.6 2.6 2.7
Tensile strength ASTM D412 MPa 9 9 9 9
Elongation ASTM D412 % 25 20 20 15
Tear strength ASTM D624 kN/m 14 14 16 15
Volume resistivity ASTM D257 MΩ-m 2 x 105 9 x 104 6 x 104 5 x 104
Thermal conductivity FTM P-1620 Watt/m•K 1.6 1.6 1.6 1.6